Shibang SCM series super thin mill is one kind of rock grinding mill which is likely the shibang s products raymond mill,high pressure suspension grinding mill , medium pseed trapezium mill and so on , and this thin grinding mill is different from others, Super thin mill shibang SCM is on the basis of our company s production experience for more than 15 years. We absorb advantages from the same trade abroad and at home. We review, research and try on 12 kinds of mills and horizontal hammer crushers. And finally we developed this high-efficiency and low-cost super thin mill by investigation and trial.
This SCM series S super thin mill is an equipment which produces thin powder and super thin powder. It is applicable to non-flammable and non-explosive materials with hardness less than 6, such as calcite, chalk, lime stone, dolomite, kaolin, bentonite, talcum, talc, magnesite, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alum earth, graphite, fluorite, variscite, potash ore, floatstone, so many stones or you can call them rocks.
Features and Benefits
* High efficiency In same condition of finished particle size and power of motor, the output is 40% higher than airflow mill and whisk mill.
* High using rate of the quick-wear part In same condition of material and finished particle size, the lifetime of the quick-wear part is longer than that of impact crusher and turbine crusher. It can be generally one year.
* High safety Because there are no axle tree and bolt in the grinding antrum, there will be no wearout of bearing and sealingpart, also no loose of bolts.
* Environmental protection It will lighten pollution and noise by using dust cleaner and muffler, which achieves environmental protection requirement.
Structural Characteristic
The whole system of the SCM series S super thin mill consists of main unit, deceleration machine, classifier, blower, hammer crusher, dustpan elevator, electro-magnetic vibrating feeder, impulse dust cleaner, piping device, cyclone collector device, classifier, high-pressure motor and muffler.
Avialable models are SCM6015, SCM8021, SCM1027.
Technical Parameter:

Model: SCM6015
Roller number: 15
Diameter (mm): DIA600
Ring number: 2
Main unit speed (mm): 235
Max. Feeding size (mm): 10
Final size (mesh): 325-2500
Capacity (kg/h): 350-2500
Overall dimension (m): 10x2x5.5

Model: SCM8021
Roller number: 21
Diameter (mm): DIA800
Ring number: 2
Main unit speed (mm): 235
Max. Feeding size (mm): 10
Final size (mesh): 325-2500
Capacity (kg/h): 600-4000
Overall dimension (m): 12.4x2.x5.8

Model: SCM1027
Roller number: 27
Diameter (mm): DIA1000
Ring number: 2
Main unit speed (mm): 235
Max. Feeding size (mm): 10
Final size (mesh): 325-2500
Capacity (kg/h): 900-6000
Overall dimension (m): 14.5x3.8x6.3
Note: This specification is just reference, any changes are subject to the products.