Model: 棒材、板材、丝材、带材、管材、锻件、圆饼
Min. Order: 200
Inconel 601 (UNS N06601/W.Nr.2.4851)
Inconel 601 (UNS N06601/W.Nr.2.4851)
Inconel 601 (UNS N06601/W.Nr.2.4851)
Inconel 601
Inconel 601 Chemaical composition: Alloy % Ni Cr Fe C Mn Si Cu Al P S
601 Min.
58 21 1.0
Max. 63 25 balance 0.1 1.5 0.5 1 1.7 0.02 0.015

Inconel 601 Physical properties Density 8.1g/cm³
Melting point 1320-1370℃

Inconel 601 Alloy m inimum mechanical properties in the room temperature Alloy state Tensile strength
Rm N/mm² Yield strength
R P0. 2N/mm² Elongation
A 5 % Brinell hardness
HB
Annealing treatment 650 300 30 -
Solution treatment 600 240 30 ≤220


Characteristic as below：
1.Excellent inoxidability in the high temperature.
2.Good resistance to carbonizing.
3.Good inoxidabilitiy in sulfur atmosphere
4.Good mechanical property in both room temperature and high temperature.
5.Good resistance to stress corrosion cracking, 601 have high creep rupture strength since it limits the carbon content and grain size, so recommend to use for above 500℃ environment.

Inconel 601 Metallurgical structure:
601 is face-centered cubic lattice structure.

Inconel 601 Corrosion resistance
One of the mainly performance of 601 is inexorability in high temperature, even in very inclement conditions. If in the process of heating and cooling cycle, 601 can generate the dense layer of oxide film to get high spalling resistance. 601 have good carbonation resistance. With excellent inoxidability in the high temperature of sulfur atmosphere since it has high chromium and aluminum content.
Inconel 601 Application field：
1.The tray,basket and tool clamp in the heat treatment factory.
2.Steel shares at annealing and radiation control, high-speed gas burners, Industrial furnace silk screen.
3.Separate tank of ammonia reforming and catalytic support grid of nitric acid producing.
4.Exhaust system parts
5.Solid waste incinerator's combustion chamber
6.Channel support and soot dealing parts.
7.Detoxification exhaust system components
8.Oxygen re-heater