screw oil press
oil press machine
screw oil expeller
http://www.seedoilpress.com/product/oil_press/screw_oil_press.html
Screw Oil Press Introduction
Screw oil press is capable of pressing a wide range of oil seeds. Characterized by the high oil output, simple design and continuous operation, screw oil press enjoys large popularity.
Screw Oil Press Advantages
1. Composed of high quality carbon steel which has high hardness and strength and wear-resistance, suitable for ceaselessly high temperature pressing.
2. Widely used for pressing many kinds of oil seeds, such as peanut, soybean, sesame, flax seed, cotton seed, sunflower, etc; popular among small or medium size mills and plants.
3. With the properly designed pressing chamber, the pre-heating process and rotation of the machine quickly increase the temperature in the chamber, which makes the inner structure of oil seeds broken and pressed easily.
4. Save labor and energy. Compared to the traditional type, Screw oil press reduces 60% electric power and saves 40% labor.
Screw Oil Press Working Procedure
Screw oil press uses the electric motor or diesel as the engine. Before pressing, preprocessing is necessary to get cleaner oil seeds. At the same time, you can turn on the heater switch to pre-heat the pressing cage. About 10 minutes later, when the temperature is high enough to meet the pressing degree, the operator can feed the oil seeds into the machine either by labor or by alto elevator(can ensure the continuous feeding). With the constantly feeding and rotation of the screw shaft, the space between the rings and the pressing screws is much smaller, which tightly squeezes oil from the seeds.
About Screw Oil Press Feeder
The screw oil press feeder is not just simplely reversed fastigiated container to let the material drop down itself, but there is a screw device and a stirring rod. When you turn on the oil press and put the materials into the feeder, the screw device will turn round to help feed the materials to go down the chamber of the oil press smoothly. This device avoids blocking in the feed inlet and the stirring rod also has certain effect on mixing the materials before pressing oil.
Screw Oil Press Technical Data
Model Capacity(t/d) Power(kw) Outside size(mm) Weight(kg)
6YL-68 1-1.5 5.5 880*440*765 140
6YL-80 2-3 5.5 1320*440*1040 330
6YL-95 3-5 7.5 1610*615*1260 420
6YL-120 5-6 11 1770*610*1300 680
6YL-120C 7-8 15 1870*750*1300 750
6YL-130 9-12 18.5 1980*700*1460 820
6YL-160 13-18 22 2020*700*780 980